(Click image to enlarge)
|
The bench consists of 2 massive sides serving as
bench leg and armrest at the same time. Between
these sides, a seat and a back are mounted.
The
sides are made of five 10 x 10 cm standards of which
the hindmost one is longer and placed at a 5° angle.
The back is fixed between the hindmost standards
and consists of two 4 x 12 cm boards. Four shorter
standards form the base of an armrest and are
provided with a 3,5 x 10 ,5cm rounded finishing
board on top.
The seat consists of three 4 x 12 cm
boards individually reinforced underneath with a
countersunk metal profile. In the middle, underneath
the boards are connected by means of a transverse
plastic supporting beam and mounted onto the
massive sides by means of a beam and nuts.
The bench can be anchored by fixing eye bolts
underneath the legs.Using round head screws and
wire-bars M12 (through the eye bolts) the table can
be fixed securely in the ground.
Available in 5 colours.
Click here for full spec sheet in printable .pdf format
|